CNC Controlled Automatic Coil WinderAN240 / 480 / 720 Series
AN240・480・720 series are excellent winding machines in versatility that can be widely used for variously-shaped bobbin winding types such as relays, solenoids, ignition coils, and others.
Regarding one of the challenges of winding system, "multi-objective production", Nittoku's tool transfer system solved the problem to vastly reduce down-time for specification changeovers. Also its modular system permits addition/removal of processing modules for soldering, taping or assembling to/from system line, the system can build up best suited manufacturing line to meet the market needs.
Further, various options will substantially increase manufacturing efficiency; double traverse mechanism for finer winding, direct spindle mechanism for faster winding and decreases running costs, dedicated software for perfect layer coil winding, etc.
 |
 |
 |
|---|---|---|
| AN480 | AN720-24-50DS with conveyor |
AN720-18-50DS Bobbin transfer type |
AN240 / AN480
| Model | AN240-(Spindles)-(Controller) | AN480-(Spindles)-(Controller) |
|---|---|---|
| No. of spindles | 3・4・6・8・12 | 6・8・12・16・24 |
| Spindle turn speed * | Standard spec. : Max. 10,000rpm Hi speed spec. : Max. 16,000rpm Special spec. : Max. 20,000rpm |
|
| Controller | Model : NSC50 Programmed by PC (sequence / winding program) |
|
| Controllable axes | 4 | |
| Power supply | AC200V±10% 3-phase 50/60Hz | |
| Power consumption | Approx. 2.5KvA | Approx. 3.0KvA |
| Air supply | Approx. 0.5MPa以上 | |
| Air consumption | Approx. 60Nl/min. (including conveyor) | |
| Machine dimensions | 800(W)x720(D)x1,030(H)mm | 1,060(W)x720(D)x1,030(H)mm |
| Machine weight | Approx. 370kg | Approx. 450kg |
Spindle direct drive type winding machine
| Model | AN720-18-50DS | AN720-24-50DS |
|---|---|---|
| No. of spindles | Max. 18 | Max. 24 |
| Spindle turn speed * | Max.24,000rpm | |
| Controller | Model : NSC50 Programmed by PC (sequence / winding program) |
|
| Controllable axes | 24 | 32 |
| Power supply | AC200V±10% 3-phase 50/60Hz | |
| Power consumption | Approx. 2.0KvA | Approx. 2.2KvA |
| Air supply | Approx. 0.5MPa以上 | |
| Air consumption | Approx. 50Nl/min. (excluding air vacuum) | |
| Machine dimensions | 1,080(W)x1,360(D)x1,460(H)mm | |
| Machine weight | Approx. 1,150kg | |
- Timing belt and/or pulley is not wanted
- No need to worry about jolting out of alignment in speeding up
- Quiet operation noise
- Easy maintenance
- Specific control on each spindle
- Dust-free from the belt
- Rear cover (safety measure) of the belt is not wanted
Free System Configuration
- You can choose transfer method (tool free flow, bobbin transfer, table transfer, etc.) according to various types; mass/multi-production, small/multi-production, with or without specification changeovers, or post process.
- Block system of specific NC Control allows operation by unit or segmentation operation for the system.
- Even the bobbin which has difficulty in transfer may be automated in post process with various transfer tools.
