Flat wire Edge-wise Coil WinderHIT-01 / HIT-01M
HIT-01 is a high quality edge-wise coil winding machine.
HIT-01M is a bench top type edge-wise coil winder that performs manual operation to set/cut at start/end lines.
 |
 |
|---|---|
| HIT-01 | HIT-01M |
HIT-01
| Model | HIT-01 | HIT-01H |
|---|---|---|
| Spindle turn speed * | Max. 2,250rpm | Max. 1,125rpm |
| Coil outer dia. * | Max. ø30x20(L)mm | Max. ø40x20(L)mm |
| Wire size * | Max. 0.6x3.8mm Min. 0.2x1.0mm |
Max. 1.2x6.0mm Min. 0.5x2.0mm |
| Lead wire length | Min. 15mm | Min. 20mm |
| Wire cut method | By air nipper cutter | |
| Wire delivery method | By cylinder | |
| Controller | Positioning controller Programming by touch panel |
|
| Motor | 400W servomotor | 1.5KW servomotor |
| Power supply | AC200V±10% Single phase 50/60Hz | |
| Power consumption | Approx. 1.3KvA | Approx. 3.9KvA |
| Air supply | Min. 0.5MPa | |
| Machine dimensions (mm) | 800(W)x540(D)x1,580(H) | 1,200(W)x540(D)x1,580(H) |
| Machine weight | Approx. 270kg | Approx. 300kg |
* Spindle turn speed and wire size changes by coil specification.
HIT-01M
| Model | HIT-01M |
|---|---|
| Spindle turn speed * | Max. 1,500rpm |
| Coil outer dia. * | Max. ø20x40(L)mm |
| Wire size * | Max. 0.6x3.0mm Min. 0.1x1.0mm |
| Lead wire length | Min. 15mm |
| Wire cut method | N/A |
| Wire delivery method | N/A |
| Controller | Exclusive controller Programming by digital switch, touch panel |
| Motor | 400W servomotor |
| Power supply | AC200V±10% Single phase 50/60Hz |
| Power consumption | Approx. 3.0KvA |
| Air supply | Min. 0.5MPa |
| Machine dimensions (mm) | 535(W)x321(D)x492(H) |
| Machine weight | Approx. 27kg |
* Spindle turn speed and wire size changes by coil specification.
